Rotary Lobe Pumps for Soaps and Detergents for transfer purpose
As the leading manufacturer of pumps in China, we have been on the road of Positive displacement rotary lobe pumps for 17 years since 2001, and have overcome one technical difficulty after another, obtain more than 30 patents. Bonve rotary lobe pumps are to be found in numerous processes, where their reliable low shear flow characteristics are ideally suited to the transfer of media such as neat soap, Surfactant, Fabric Conditioner. We select the pump according to your characteristics of medium and condition of the technological requirements, bring you the best pump for your critical process, satisfied by you and your customers.
How Bonve pump works?
The even rotation of the rotor pair creates a vacuum on the priming side of the pump, which can be defined by the direction of rotation of the drive. This vacuum draws the liquid into the pump chamber. With further rotation, the pumped medium is conveyed past the pump wall into the pressure area. Up to six chamber charges are displaced with each drive rotation– depending on the rotor type. When the rotor is at a standstill, the pump seals off almost completely.
What Bonve pumps advantage?
- Gap is kept between the rotors and between the rotor and the pump body, no friction, long life.
- Simple assembling and disassembling, easy to maintenance and clean, strong resistance to wearing.
- High efficiency and energy-saving, low failure rate, reliable sealing and low noise.
- Capable to pump the viscous materials upto 1.5 million cps and pulp with the solid volume of 60%.
- Movable pumps can be used to pump canned medium, with intake vacuum of 0.08 Mpa.
Who used Bonve pumps?
Bonve Pump main technical parameters
|
Model |
Displacement |
RPM |
NormalFlow |
Dis.Pre. |
Power |
Port size(mm) |
|
|
|
(L/r) |
(r/min) |
(M³/h) |
(Mpa) |
(kW) |
Stand. |
Enlarged |
|
25BV12-05 |
0.06 |
10-1000 |
0-0.5 |
0-1.2 |
0.37-1.1 |
15 |
25 |
|
40BV12-2 |
0.15 |
10-1000 |
0-2 |
0-1.2 |
0.75-2.2 |
25 |
40 |
|
50BV12-5 |
0.32 |
10-800 |
0-5 |
0-1.2 |
1.5-4 |
40 |
50 |
|
65BV12-10 |
0.65 |
10-600 |
0-10 |
0-1.2 |
2.2-7.5 |
50 |
65 |
|
80BV12-20 |
1.74 |
10-500 |
0-20 |
0-1.2 |
4-15 |
65 |
80 |
|
90BV12-30 |
2.60 |
10-500 |
0-30 |
0-1.2 |
5.5-22 |
80 |
100 |
|
100BV12-40 |
3.65 |
10-500 |
0-40 |
0-1.2 |
7.5-30 |
80 |
100 |
|
125BV12-50 |
4.60 |
10-500 |
0-50 |
0-1.2 |
7.5-37 |
100 |
125 |
|
140BV12-70 |
6.10 |
10-500 |
0-70 |
0-1.2 |
11-45 |
125 |
150 |
|
150BV12-80 |
7.63 |
10-500 |
0-80 |
0-1.2 |
11-55 |
125 |
150 |
|
200BV12-120 |
11.56 |
10-400 |
0-120 |
0-1.2 |
15-75 |
150 |
200 |
|
250BV12-150 |
14.22 |
10-400 |
0-150 |
0-1.2 |
18.5-90 |
150 |
250 |
|
300BV12-200 |
20.80 |
10-300 |
0-200 |
0-1.2 |
22-110 |
200 |
300 |
|
350BV12-300 |
32.60 |
10-250 |
0-300 |
0-1.2 |
45-160 |
300 |
350 |
|
400BV12-350 |
50.40 |
10-250 |
0-350 |
0-1.2 |
55-200 |
350 |
400 |
Note:
1. Tested medium: water. Your liquid's density, viscosity and temperature are necessary to supply when choose the pump.
2. Speed, flow rate, electrical power and pressure will be varified according to different liquid properties.
3. Port size can be changed as needed.
How to choose Bonve pumps?
|
Selection Guideline |
|
Liquid name:___________ |
|
Viscosity:_______cp Density:_______ Temperature:_____℃ PH value:________ |
|
Solid content:_______ Max. size of particle:_______ |
|
Capacity: Max. required__________ L/H Working required__________ L/H |
|
Discharge pressure: Max. required__________Mpa Working required__________ Mpa |
|
Connection type required: Thread [ ] Clamp [ ] |
|
Installation type: Fixed [ ] Movable [ ] |
|
Voltage:____ V Frequency: _____Hz |
|
Liquid contact material: SS304 [ ] 316 [ ] 316L [ ] |
|
Special request_____________________________________ |
|
Order qty. |
We are so pleased with your interest into Our Bonve Rotary Lobe Pumps. Hope we can work with you and solve your pumping problem during production. E-mail to cathy@bonvepumps.com for a pump solution.
