Bonve homogenizer mixing pump is an high efficiency ultra-fine homogeneous pump with mixing, dispersion, breaking, dissolution, refinery, homogenization, emulsifying and transporting, proceed products are dispersed, refined and emulsified by the rotor and stator in stages, it is suitable for large and medium batch continuous online production or cyclic processing production process.

In production, the homogenizer mixing pump will encounter some faults in the process of use, which will directly affect the production efficiency of the emulsion pump. In case of pump failure, refer to the following four methods for inspection and maintenance:

1. The pump body needs to be cleaned before use;

2. The mechanical seal of homogenizer pump must be supplied with cooling water before it starts, so as not to cause the mechanical seal to dry and break;

3. After the power is turned on, pay attention to the fact that the pump head does not reverse. If the pump head reverses, please stop it immediately and re-wire and restart;

4. When the homogenizer emulsifying pump is in normal operation, pay attention to observe whether there is material leakage from the mechanical seal. If a leakage is found, stop the operation of the equipment, check and eliminate the cause, and replace the mechanical seal;

5. If the concentration or viscosity of the processed material is too high, a Bonve rotary lobe pump must be equipped before the homogenizer mixing pump to avoid overcurrent damage to the motor;

6. If abnormal noise occurs during the use of the pump, shut it down and troubleshoot carefully;

7. After each production, the inside of the pump cavity should be cleaned, so as to not only maintain the working efficiency of the stator and rotor, but also protect the mechanical seal;

8. Before using this equipment, the user needs to formulate corresponding safety production operating procedures to ensure the safety of operators and equipment;

9. Regularly check the stator and rotor, and if they find excessive wear, replace the corresponding parts in time to ensure the effect of dispersion and emulsification.

Refer to the above operation to effectively avoid the failure of the Bonve homogenizing mixer. If you have any questions about the operation, please contact us and we will provide you with a satisfactory answer.