-
How to improve the performance of Rotary lobe pumps in chemical process?
Mar 25, 2019
There are five unit operations for chemical treatment. This article will focus on the fluid motion process, which is the most common transfer, filtration, solid fluidization and transportation. For reference, the other four unit operations are heat transfer (evaporation and heat exchange), mass transfer (distillation, extraction, adsorption and drying), thermodynamics (refrigeration and gas liquef...
View More
-
How to cut costs when buying a pump?
Mar 25, 2019
When you want to save on energy costs, pumps might not be your first thought. But think again. Pumps actually consume around 10 % of the world's energy, less than any other type of equipment. And while pump optimization is&nb...
View More
-
Why mechanical seal and how to choose?
Apr 06, 2019
Why mechanical seal and how to choose? For more than 100 years, a variety of sealing materials, such as fillers, have been used to reduce the amount of liquid leakage from the liquid pump housing along the main shaft. The oldest seal design is still widely used in current liquid pumps because of its low starting cost and familiarity with the factory staff. However, due to environmental issues, the...
View More
-
How to choose Rotor types for Rotor Pump?
Apr 12, 2019
The Rotor Pump achieves the purpose of transporting fluid by means of periodic conversion of a plurality of fixed volume delivery units in the working chamber. The Rotor Pump passes through a pair of synchronously rotating rotors during operation. The rotor is driven by a pair of synchronizing gears in the pump body, and rotates in the opposite direction through the main shaft and the auxiliary sh...
View More
-
The higher speed of the emulsifying machine, the better?
Apr 20, 2019
Emulsifying machine plays an important role in industrial equipment mixing systems, especially in solid-liquid mixing, liquid-liquid mixing, oil-water emulsification, dispersion homogenization, and shear grinding. The reason why it is called an emulsifier is that it can achieve emulsification. The oil-water two-phase medium is thoroughly mixed to form an emulsion, which is divided into two ty...
View More
-
O-ring material and characteristics
May 10, 2019
O-ring is essential in the assembly process of the pump. The O-rings material shall be different to adapt pumped liquid. Fluororubber and EPDM are typically to use. Why? The following are the characteristics of these two materials. Characteristics of fluororubber Good stability Fluororubber has a high degree of chemical stability and is currently the best medium for all elastomers. Fluororubber re...
View More
Business WeChat
